6F8C1370
CAUTION
Mandatory
When performing program changes
during operation, forced output,
run, or halt operations, ensure
safety.
Wrong operations or failure to ensure
safety may cause an accident or damage
to the machine.
Mandatory
When there is any smoke or strange
odor, turn off the power.
Otherwise, it may cause a fire or electric
shock.
Contact one of our branch offices or
service agencies.
No touch
Do not touch the card parts, contacts,
connectors, or soldered surface in the
module.
Ends of the lead wire of the parts may
cause an injury, or electrostatic
breakdown of the ICs or LSIs may occur,
resulting in failure.
Prohibited
Do not forcefully bend, pull, or twist
the power cord and cables.
It may cause breaks or heating.
Prohibited
Do not insert any metal into the gaps
of the device main body.
It may cause fire.
4. Safety Precautions in Maintenance and Inspection
WARNING
Mandatory
When installing or removing the
module, unit, terminal block, or
wiring cable, make sure that the
external power supply is off.
Otherwise, there will be live electric
poles on the back of the external
terminal block of the module, causing an
electric shock.
Prohibited
Do not connect the battery in
reverse, charge, disassemble,
overheat it, throw it into fire, or
short-circuit it.
It may cause an explosion or fire.
Mandatory
When replacing the power fuse or
alarm fuse of the device, turn off the
device.
Otherwise, it may cause an electric shock
or fire.
Mandatory
Replace fuses or batteries with
specified items.
Using anything other than specified may
cause a fire or failure.
To Next Page
Loading...
