Toshiba nv Series - Page 27

1.4 art Names and Functions of Power Module
Unified Controller nv series type2 light Controller Unit Instruction Manual
9
Table 1-6 Power module PS693 Specification

Model Rated input voltage
Output rating
Weight
(approx.)
Internal control
power
External power
supply
Max. power
PS693 100-240VAC
(85 - 264VAC)
5V-7.0A
3.3V-1.0A
24VDC(±10%)
0.8A
35 W 600 g
① POWER LED (green)
Turns on when the internal 5V power is supplied normally to the output.
② External 24V power supply terminal
Supplies 24VDC to an external device such as the sensor, relay output module
or analog I/O module.
③ Operation signal output terminal (RUN output)
The output terminal (1a contact) turns on when the controller module normally
operates.
④ AC power supply input terminal
Connects the AC power supply.
⑤ Line filter ground terminal (LG)
This is the neutral point of the primary power side line filter (grounding terminal).
⑥ Frame ground terminal (FG)
This is connected to the frame (grounding terminal).
This is connected to the internal circuit SG (signal ground) via a capacitor.