User’s Manual EN-37
dynadock™
Eject Dock and Sleep
When the dynadock is connected to your computer, the TOSHIBA
dynadock Utility can remove all devices and let the system sleep instantly
with one-click. Please follow these steps:
1. Click or right-click the icon in the system tray/notification area.
(Sample Image) system tray/notification screen
2. Point to “Eject and Sleep” and select “Hibernation” or “Standby” from
the sub menu.
(Sample Image) Eject and Sleep screen
3. Wait before removing the dynadock from the system.
(Sample Image) Undocking screen
If the dynadock is removed from the system successfully, the icon in the
system tray/notification area will disappear.
If the dock is removed unexpectedly, the software can detect this event and
will give the user an “Unexpected remove”dialog box as shown below.
(Sample Image) Warning message
To Next Page
Loading...
