Unified Controller nv series PROFIBUS(PA912) Module Instruction Manual
77
■
■■
■ Reading the system log
System logs of the I/O node are collected for analyzing problems.
System logs of the I/O node can be collected with the Unified Controller nv
series/Integrated Controller V series Engineering Tool nV-Tool.
The procedure to collect system logs is shown below. Also refer to the online
help of the nV-Tool, and "Unified Controller nv series/Integrated Controller V
series Engineering Tool 4 Basic Operation Manual (6F8C1290)."
1
Display the system view.
2
Display the state of the I/O node.
To display the state of the I/O node, select the controller and click the I/O
node state button, or double-click the [I/O state] area. The typical alarm
states of the I/O node and I/O module are displayed by I/O node.
3
Display the system logs.
To display the system logs of the I/O node, select the PA912 and select
<View><System log> from the menu.
4
Save the displayed system logs to a file.
The system log information displayed on the screen can be saved to a file in
the CSV format.
To save, select <File><Save file> from the menu.
To Next Page
Loading...
