3 Tests and Diagnostics 3.14 Wireless LAN Test Program (CERT201T.EXE)
3-30 Portege 2000 Maintenance Manual (960-333)
3 Tests and Diagnostics
3.14 Wireless LAN Test Program (CERT201T.EXE)
This section describes about the wireless LAN transmitting-receiving test program,
CERT201T.EXE.
Note:
Use another computer that can communicate by the wireless LAN as a reference
machine to perform this test.
Follow the steps below to perform the test program, (CERT201T.EXE). Refer to Section
2.14, Wireless LAN Troubleshooting, for a detailed description of the troubleshooting
procedures for the wireless LAN.
1. Preparing the target machine for Ping Pong Responder
(a) Insert a floppy disk containing the test program into the target machine and turn the
target machine.
(b) Prompts are displayed as shown in Figure 3-1, if it is the first time the program has
run. Input parameters are shown below:
######## Wireless LAN sub system repaor test VX.XX ########
.... Press test number[1-3,0] ?
############################################################################
############################################################################
****************************************************************************
* *
* 1 ............ Transmit & Receive test [Responder] *
*
* 2 ............ MAC Address test [Mini-PCI Wireless LAN] *
* 3 ............ Wireless LAN (WEP64/128) test *
* 0 ............ Transmit & Receive test [Initiator] *
* *
############################################################################
* *
Figure 3-1 Wireless LAN test Menu
To Next Page
Loading...
