4 Replacement Procedures 4.4 HDD
4-14 Portage 2000 Maintenance Manual (960-333)
4.4 HDD
Removing the HDD
The following describes the procedure for removing the HDD (See Figure 4-5,4-6,4-7)
Caution: Take care not to press on the top or bottom of the HDD. Pressure may cause
data loss or damage to the device.
1. Turn the computer upside down.
2. Remove the following screws fixing the HDD slot cover and remove the cover.
• M2×4B BIND screw x2
M2
×
4B BIND
HDD slot cover
Figure 4-5 Removing the HDD slot cover
To Next Page
Loading...
