4.5 Keyboard/Bottom cover 4 Replacement Procedures
Portage 2000 Maintenance Manual (960-333) 4-17
4.5 Keyboard/Bottom cover
4.5.1 Keyboard
Removing the keyboard
The following describes the procedure for removing the keyboard (See Figure 4-8,4-9).
Caution: As the keytop may fall out, when handling the keyboard always hold it by the
frame and do not touch the keytop.
1. Remove the following screw fixing the bottom cover
• M2×3B S-THIN HEAD screw x1
M2×3B S-THIN HEAD
Figure 4-8 Removing the bottom cover
2. Open the display.
To Next Page
Loading...
