Toshiba Portege 2000 - Main Board;Fan

4 Replacement Procedures 4.9 Main board/ FAN
4-28 Portage 2000 Maintenance Manual (960-333)
4.9 Main board/ FAN
4.9.1 Main board
Removing the main board
The following describes the procedure for removing the main board. (See Figure 4-19)
1. Disconnect the connector PJ34, PJ35, PJ352 from the main board.
2. Remove the following screws fixing the main board.
• M2×4Z S-THIN HEAD screw x2
M
2
×
4Z S-THIN HEAD
PJ352
PJ34
PJ35
Figure 4-19 Removing the main board