4.12 Power membrane SW/Wireless LAN antenna 4 Replacement Procedures
Portage 2000 Maintenance Manual (960-333) 4-37
4.12 Power membrane SW/Wireless LAN antenna
4.12.1 Power membrane SW
Removing the power membrane SW
The following describes the procedure for removing the power membrane SW. (See
Figure 4-27,4-28)
1. Remove the following screw fixing the plastic holder.
• M2×4Z BIND screw x1
M2
×
4Z BIND
Membrane SW
Figure 4-27 Removing the plastic holder