Toshiba Portege 2000 - Page 39

2.2 Troubleshooting Flowchart 2 Troubleshooting
Portege 2000 Maintenance Manual (960-333) 2-3
Figure 2-1 Troubleshooting flowchart (1/2)
Yes
Turn the Power Switch on.
START
Connect the AC adapter
to the DC IN socket.
Perform the Power Supply
Troubleshooting Procedures
in section 2.3.
No
Does the DC IN icon glow?
Does the Battery icon glow?
Does the DC IN icon flash when the
power is turned on?
Is an error message displayed?
Is the
“Toshiba” logo
message displayed?
If the “Password=” message displays,
type the password.
Are Toshiba Windows 98,2000 or
XP being loaded?
1
Perform the Power Supply
Troubleshooting Procedures
in section 2.3.
Perform the Power Supply
Troubleshooting Procedures
in section 2.3.
Perform the Main Board
Troubleshooting Procedures
in section 2.4.
Perform the Display
Troubleshooting Procedures
in section 2.8.
Perform the 1.8” HDD
Troubleshooting Procedures
in section 2.6.
No
Yes
Yes
No
Yes
No
Yes
No
No
Yes