2.4 Main board Troubleshooting 2 Troubleshooting
Portege 2000 Maintenance Manual (960-333) 2-25
Table 2-3 D port status (6/6)
D port status
Inspection items details
Setting up battery safe mode
Setting up date
Waiting for the end of AC-Link initialization
Waiting for the end of Bluetooth initialization
Updating DMI Wakeup factor and SM-BIOS structure table
Closing configuration space of PCI devices
Cache control
Updating parameter block A
Setting up the clock speed of the CPU to the appointed
value by the Setup
Waiting for the motor off of a disabled HDD
Concluding FDD information
Clearing power button status
Enabling the power button
F11Dh Waiting for setting up of a
clock generator
Waiting for setting up of a clock generator
FFFFh Completion Completion of checking DPORT status
Check 1 If the D port status error code F11Ah is displayed, go to the 3.5” USB FDD
Troubleshooting Procedures in Section 2.5 or the 1.8” HDD Troubleshooting
Procedures in Section 2.6.
Check 2 If any other D port status error code is displayed, perform Procedure 3.
D port error statuses are following:
Error code Contents
F160h Timer CH2 error
F161h PIT error
F162h PIC #1 error
F163h PIC #2 error
F11Eh Clock generator setting error
To Next Page
Loading...
