3.1 The Diagnostic Test 3 Tests and Diagnostics
Portege 2000 Maintenance Manual (960-333) 3-1
3 Tests and Diagnostics
3.1 The Diagnostic Test
This chapter explains how to use the Diagnostic Test program to test the functions of the
computer’s hardware modules. They are grouped into the Service Program Modules and the
Test Program Modules and the Diagnostic Test consists of 10 programs.
NOTE: To start the diagnostics, follow these steps:
1. Check all cables for loose connections.
2. Exit any application and close Windows.
The DIAGNOSTIC MENU consists of the following 6 test programs.
DIAGNOSTIC TEST
HEAD CLEANING
LOG UTILITIES
RUNNING TEST
FDD UTILITIES
SYSTEM CONFIGURATION
The DIAGNOSTIC TEST MENU contains the following 10 functional tests:
SYSTEM TEST
MEMORY TEST
KEYBOARD TEST
DISPLAY TEST
FLOPPY DISK TEST
ASYNC TEST
HARD DISK TEST
REAL TIMER TEST
NDP TEST
EXPANSION TEST
To Next Page
Loading...
