User’s Manual 7-1
HW Setup
Chapter 7
HW Setup
This chapter explains how to use the TOSHIBA HW Setup program to
configure your computer, and provides information on settings for various
functions.
Accessing HW Setup
To run the HW Setup program, click Start All Programs TOSHIBA
Utilities HWSetup.
HW Setup window
The HW Setup window contains a number of tabs (General, Display, Boot
Priority, Keyboard, CPU, LAN, Device Config and USB) to allow specific
functions of the computer to be configured.
In addition there are also three buttons: OK, Cancel and Apply.
General
This window displays the BIOS version and contains two buttons: Default
and About.
Setup
This field displays the installed BIOS version and date.
OK Accepts your changes and closes the HW Setup
window.
Cancel Closes the window without accepting your
changes.
Apply Accepts all your changes without closing the HW
Setup window.
Default
Return all HW Setup values to the factory
settings.
About
Display the HW Setup version.
To Next Page
Loading...
