Appendix J Maintenance of TOSHIBA RAID Appendices
How to identify the cause of failure
(1) When “Fail” or “NODRIVE” is displayed.
According to “Operation of Independent utility”, boot the independent utility to display
the Drive Log.
To identify the failure cause of Port 0, analyze the Drive Log of [REDUNDANT] side of
Port 1.
To identify the failure cause of Port 1, analyze the Drive Log of [REDUNDANT] side of
Port 0.
nalyze this log.
1. Find the log of message of “Fail this drive” last generated, using [PgUp] and
[PgDn] keys.
PORTEGE M400 Maintenance Manual (960-541) [CONFIDENTIAL] J-3
Get user manuals: See SafeManuals.com
To Next Page
Loading...
