Toshiba Portege M700 - H;W (Hardware) Initial Information Setting Tool; Heatrun Test Program

3 Tests and Diagnostics
Rev B
3.1.2 H/W (Hardware) initial information setting tool
The H/W initial information setting tool consists of the following programs.
 Eentry of the DMI infomation
 DMI information save
 DMI information recovery
You will need the following equipment to perform some of the programs.
 Repair test program Disk (Main T&D)
3.1.3 Heatrun test program
The heatrun test starts automatically after the selection.
You will need the following equipment to perform this program.
 Repair test program Disk (Main T&D)
3-4 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)