Toshiba Portege M700 - Smart Card Slot (Smart Card Model Only)

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.
F
ehler! Formatvorla
g
e nic
h
Rev B
4.25 Smart card slot (Smart card model only)
Removing the Smart card slot
The following describes the procedure for removing the Smart card slot. (See Figure 4-
SMART.)
1. Remove the following screws securing the Smart card slot.
• M2.0×3.0C S-THIN HEAD screw ×2
• M2.0×6.0C S-THIN HEAD screw ×2
2. Disconnect the Smart card slot cable form the connector CN2170 on the system
board and remove the Smart card slot.
M2.0×3.0C S-THIN HEAD
M2.0×6.0C S-THIN HEAD
CN2170
Smart card slot
Smart card slot cable
Figure 4- SMART Removing the Smart card slot
4-70 [CONFIDENTIAL] PORTÉGÉ M700/M750 Maintenance Manual (960-661)