55
Getting Started
Adding memory (optional)
2 Click Shut Down.
The operating system turns off the computer.
3 Unplug and remove any cables connected to the computer,
including the AC adaptor.
4 Remove the main battery. For information on removing the
main battery, see “Removing the battery from the computer”
on page 120.
5 Close the display panel and turn the computer upside down to
locate the memory module slot cover.
Before you turn the computer over, make sure that the computer
display is properly closed and is not in tablet mode. Setting the
computer down on the display may cause damage to the screen.
(Sample Illustration) Locating the memory module slot cover
Memory module slot cover
Front of computer
To Next Page
Loading...
