4.21 Internal microphone 4 Replacement Procedures
4.21 Internal microphone
Removing the Internal microphone
To remove the internal microphone, follow the steps below and refer to Figure 4-28.
1. Disconnect the microphone cable from the connector CN6050 on the system board.
2. Remove the internal microphone from the microphone holder.
Microphone cable
Internal microphone
CN6050
Figure 4-28 Removing the internal microphone
Installing the Internal microphone
To install the internal microphone, follow the steps below and refer to Figure 4-28.
1. Install the internal microphone to the microphone holder.
2. Connect the microphone cable to the connector CN6050 on the system board.
PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 4-41
To Next Page
Loading...
