4 Replacement Procedures 4.3 PC card/SD card
4-10 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519)
4.3 PC card/SD card
4.3.1 PC card
Removing the PC card
To remove the PC card, follow the steps below and refer to Figure 4-2.
CAUTION: Insert or remove the PC card in accordance with any instructions in the PC
card manual or the manuals of the computer system you are using.
1. Push the eject button. It will pop out when you release it. Then press once more the
eject button to eject the PC card.
2. Grasp the PC card and remove it.
Figure 4-2 Removing the PC card
Installing the PC card
To install the PC card, follow the steps below and refer to Figure 4-2.
1. Make sure the eject button do not stick out.
2. Insert the PC card and press it until it is securely connected.
Eject button
PC card
To Next Page
Loading...
