EasyManua.ls Logo

Toshiba Portege R200 - Hd Fpc; Figure 4-24 Removing the HD FPC

Toshiba Portege R200
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 Replacement Procedures 4.17 HD FPC
4-36 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519)
4.17 HD FPC
Removing the HD FPC
To remove the HD FPC, follow the steps below and refer to Figure 4-24.
1. Peel off the glass tape and disconnect the HD FPC from the connector CN1800 on
the system board.
Figure 4-24 Removing the HD FPC
Installing the HD FPC
To install the HD FPC, follow the steps below and refer to Figure 4-24.
1. Connect the HD FPC to the connector CN1800 on the system board and secure it
with the glass tape.
Glass tape
HD FPC
CN1800

Table of Contents

Other manuals for Toshiba Portege R200

Related product manuals