EasyManua.ls Logo

Toshiba Portege R200 - PC Card Slot; Figure 4-25 Removing the PC Card Slot

Toshiba Portege R200
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.18 PC card slot 4 Replacement Procedures
PORTEGE R200 Maintenance Manual (960-519) [CONFIDENTIAL] 4-37
4.18 PC card slot
Removing the PC card slot
To remove the PC card slot, follow the steps below and refer to Figure 4-25.
1. Remove the following screws fixing the PC card slot.
M2×4C S-FLAT HEAD screw x2
2. Remove the PC card slot from the connector CN2110 on the system board.
Figure 4-25 Removing the PC card slot
Installing the PC card slot
To install the PC card slot, follow the steps below and refer to Figure 4-25.
1. Connect the PC card slot to the connector CN2110 on the system board and secure it
with the following screws.
M2×4C S-FLAT HEAD screw x2
M2×4C S-FLAT HEAD
PC card slot
CN2110

Table of Contents

Other manuals for Toshiba Portege R200

Related product manuals