Toshiba Portege R200 - Page 50

4 Replacement Procedures 4.23 Display mask
4-44 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519)
Installing the Display mask
To install the display mask, follow the steps below and refer to Figure 4-30.
1. Install the display mask while engaging the latches.
2. Secure the following screws to fix the display mask.
• M2×3.2S FLAT HEAD screw x8 (“3.2” in the figure 4-30)
• M2.5×4S FLAT HEAD screw x2 (“4” in the figure 4-30)
3. Stick the six mask seals and four LCD cushions to the display mask.