4 Replacement Procedures 4.26 Wireless LAN antenna/Bluetooth antenna
4-52 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519)
4.26 Wireless LAN antenna/Bluetooth antenna
4.26.1 Wireless LAN antenna
Removing the Wireless LAN antenna
To remove the wireless LAN antenna, follow the steps below and refer to Figure 4-36.
1. Peel off the six acetate tapes on the display cover.
2. Peel off the wireless LAN antennas from the display cover and remove it with the
wireless LAN antenna cables.
Figure 4-36 Removing the wireless LAN antenna
Installing the Wireless LAN antenna
To install the wireless LAN antenna, follow the steps below and refer to Figure 4-36.
1. Stick the wireless LAN antenna on the display cover in place.
2. Set the wireless LAN antenna cables on the display cover in place.
3. Secure the wireless LAN antenna cables with the six acetate tapes.
Acetate tape
Acetate tape
Wireless LAN antenna
Wireless LAN antenna
Acetate tape
Wireless LAN antenna cable
Wireless LAN antenna cable
To Next Page
Loading...
