3 Tests and Diagnostics
3.2.1 Diagnostics menu (T&D)
To execute this program, press 1, or select (1) Repair Main and press Enter in the
startup menu, press Enter. The following menu appears.
TOSHIBA personal computer XXXXXX DIAGNOSTICS
version X.XX (c) copyright TOSHIBA Corp. 20XX
DIAGNOSTICS MENU :
1 - DIAGNOSTIC TEST
2 – ONLY ONE TEST
3 -
4 - HEAD CLEANING
5 - LOG UTILITIES
6 - RUNNING TEST
7 - FDD UTILITIES
8 - SYSTEM CONFIGURATION
9 – POWER OFF
NOTE: To exit the DIAGNOSTIC TEST MENU, press the Esc key. If a test program is
in progress, press Ctrl + Break to exit the test program. If a test program is in
progress, press Ctrl + C to stop the test program.
PORTEGE R300 Maintenance Manual (960-591) [CONFIDENTIAL] 3-5
To Next Page
Loading...
