4.7 Keyboard 4 Replacement Procedures
4.7 Keyboard
Removing the Keyboard
To remove the keyboard, follow the steps below and refer to Figure 4-6 to Figure 4-8.
1. Turn over the computer and open the display.
2. Insert your fingers into the slits on both sides and lift up the keyboard holder (L/R)
to remove.
3. Insert your fingers into the slits on both sides and lift up the touch pad mask to
remove.
4. Remove the following screws securing the keyboard.
• M2×2.5B S-THIN HEAD screw ×2
Touch pad mask
M2×2.5B S-THIN HEAD
Keyboard holder
Figure 4-6 Removing the keyboard (1)
PORTÉGÉ R300 Maintenance Manual (960-591) [CONFIDENTIAL] 4-15
To Next Page
Loading...
