User’s Manual 1-6
Getting Started
Opening the display
The computer's LCD display panel can be opened to a wide range of
angles for optimal viewing.
1. Slide the display latch on the front of the computer to unlatch the LCD
display panel.
2. While holding down the palm rest with one hand so that the main body
of the computer is not raised, slowly lift the LCD display panel - this will
allow the angle of the LCD display panel to be adjusted to provide
optimum clarity.
Figure 1-4 Opening the LCD display panel
Display latch
LCD display panel
Use reasonable care when opening and closing the LCD display panel.
Opening it vigorously or slamming it shut could damage the computer.
■ Be careful not to open the LCD display panel too far as this could put
stress on the display panel’s hinges and cause damage.
■ Do not press or push on the LCD display panel.
■ Do not lift the computer by the LCD display panel.
■ Do not close the LCD display panel with pens or any other objects left
in between the LCD display panel and the keyboard.
■ When opening or closing the LCD display panel, place one hand on the
palm rest to hold the computer in place and use the other hand to
slowly open or close the LCD display panel (Do not use excessive
force when opening or closing the LCD display panel).
To Next Page
Loading...
