4 Replacement Procedures 4.19 Speaker
4.19 Speaker
Removing the Speaker
To remove the speaker, follow the steps below and refer to Figure 4-29.
1. Peel off the polyimide tape.
CAUTION: Do not reuse the removed polyimide tape.
2. Take out the speaker from the slot.
3. Open four insulators and remove the speaker cable from the slot.
S
eake
Polyimide tape
Speaker cable
Insulator
Figure 4-29 Removing the speaker
4-48 [CONFIDENTIAL] PORTÉGÉ R500 Maintenance Manual (960-634)
To Next Page
Loading...
