4 Replacement Procedures 4.11 Optical disk drive (DVD-Super Multi drive)/SD board
4. Disconnect the SD board FPC and ODD FPC form the connectors CN9710 and
CN1820 on the SD board.
SD board FPC
ODD FPC
SD board
CN1820
CN9710
Figure 4-14 Removing the optical disk drive/SD board (2)
5. Remove the following screws, ODD FPC, ODD rear plate and ODD side plate.
• M2×4C S-THIN HEAD ×2
• M2×3B S-THIN HEAD ×1
M2x4C S-THIN HEAD
ODD rear plate
ODD side plate
ODD FPC
M2x3B S-THIN HEAD
Figure 4-15 Removing the optical disk drive/SD board (3)
4-28 [CONFIDENTIAL] PORTÉGÉ R600 Maintenance Manual (960-709)