4 Replacement Procedures 4.18 Bluetooth module
4.18 Bluetooth module
Removing the Bluetooth module
To remove the Bluetooth module, follow the steps below and refer to Figure 4-25.
1. Disconnect the Bluetooth antenna cable and Bluetooth FFC from the connector on
the Bluetooth module.
2. Remove the following screw and Bluetooth module.
• M2×3B S-THIN HEAD ×1
Bluetooth module
Bluetooth antenna cable
Bluetooth FFC
M2x3B S-THIN HEAD
Figure 4-25 Removing the Bluetooth module
4-44 [CONFIDENTIAL] PORTÉGÉ R600 Maintenance Manual (960-709)
To Next Page
Loading...
