Toshiba Portege R600 - Page 280

4 Replacement Procedures 4.21 Speaker
4.21 Speaker
Removing the Speaker
To remove the speaker, follow the steps below and refer to Figure 4-29.
1. Peel off the polyimide tape.
NOTE: Do not reuse the removed polyimide tape. Be sure to use a new polyimide tape.
2. Take out the speaker from the slot.
3. Open the insulators and remove the speaker harness from the slot.
S
p
eake
r
Polyimide tape
Speaker harness
Insulator
Figure 4-29 Removing the speaker
4-52 [CONFIDENTIAL] PORTÉGÉ R600 Maintenance Manual (960-709)