Toshiba PORTEGE R700 Series - Bridge Media (SD, Mini SD, Micro SD Card); Figure; Removing the Bridge Media

4 Replacement Procedures4.5 Bridge media (SD, mini SD, Micro SD Card/MultiMedia Card)
4-14 [CONFIDENTIAL] PORTÉGÉ R700 Maintenance Manual (960-833)
4.5 Bridge media (SD, mini SD, Micro SD Card/MultiMedia Card)
Removing the Bridge media
To remove the Bridge media, follow the steps below and refer to Figure 4-4.
CAUTION: Before you remove the Bridge media, refer to the card’s documentation and
to your operating system documentation for proper procedures and
precautions.
1. Push the Bridge media. It will pop out partly when you release, so pull out the card.
(For an instance, SD card is described in the figure 4-4.)
Figure 4-4 Removing the Bridge media
Installing the Bridge media
To install the Bridge media, follow the steps below and refer to Figure 4-4.
1. Insert the Bridge media in the card slot and push it carefully to ensure a firm
connection.
SD card