4.13 Wireless LAN card 4 Replacement Procedures
PORTÉGÉ R700 Maintenance Manual (960-833) [CONFIDENTIAL] 4-39
Installing the Wireless LAN card
To install the wireless LAN card, follow the steps below and refer to Figure 4-23.
1. Connect the wireless LAN antenna cables to the wireless LAN card (white cable to
“A” or “1” and black cable to “B” or “2”) using an antenna coaxial cable
disconnector.
2. Insert the wireless LAN card to the connector on the system board slantwise.
3. Push down the wireless LAN card and secure it with the following screws.
• M2×3B S-THIN HEAD screw ×1
To Next Page
Loading...
