4 Replacement Procedures 4.23 Keyboard
4-78 [CONFIDENTIAL] PORTÉGÉ R830/Satellite R830 Maintenance Manual (960-880)
4.23 Keyboard
Removing the Keyboard
To remove the keyboard, follow the steps below and refer to Figure 4-48.
1. Remove the aluminum tape (AL TAPE) from the back of the cover assembly. (Refer
to the NOTE of the P.4-68)
2. Turn the cover assembly face up and peel off the keyboard adhered to the insulator.
3. Peel off the insulator (KB INSULATOR) from the cover assembly.
NOTE: Do not reuse the removed keyboard and KB insulator. Be sure to use new
keyboard and KB insulator.
Figure 4-48 Removing the keyboard
Keyboard
Insulator
To Next Page
Loading...
