Either a 2-pin or 3-pin adaptor/cord will be included with the computer
depending on the model.
2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on
your computer.
3. Plug the power cord into a live wall outlet - the DC IN/Battery indicator
should glow.
Figure 2-3 Connecting the DC output plug to the computer (Z30-A)
Figure 2-4 Connecting the DC output plug to the computer (Z40-A)
1. DC IN 19V jack 2. DC output plug
Product appearance depends on the model you purchased.
Opening the display
The display panel can be opened to a wide range of angles for optimal
viewing.
While holding down the palm rest with one hand so that the main body of
the computer is not raised, slowly lift the display panel - this will allow the
angle of the display panel to be adjusted to provide optimum clarity.
User's Manual
2-5
To Next Page
Loading...
