6F3B0253
204 T1-16S User’s Manual
7. Instructions
FUN 129 RET Subroutine return
Expression
−−[ RET ]−
Function
This instruction indicates the end of a subroutine. When program execution is reached this
instruction, it is returned to the original CALL instruction.
Execution condition
Input Operation Output
-
Execution
-
Operand
No operand is required.
Example
Main program Subroutine
| | [ CALL N.008 ] [ SUBR (008)]
[ RET ]
Note
• Refer to the SUBR instruction (FUN 137).
• The RET instruction can be programmed only in the program type ‘Subroutine’.
• The RET instruction must be connected directly to the left power rail.
To Next Page
Loading...
