6F3B0253
240 T1-16S User’s Manual
7. Instructions
Note
• In the T1-16S, the following register/device range is only effective for this Direct I/O instruction.
Input on basic unit Output on basic unit I/O module
X000 - X007 Y020 - Y027 Not effective
• The Direct I/O instruction can be programmed in the main program and in the interrupt program.
If this instruction is programmed in both, the instruction in the main program should be executed
in interrupt disable state. Refer to EI (FUN 140) and DI (FUN 141) instructions.
To Next Page
Loading...
