57
Learning the Basics
Using the optical disc drive
4 Grasp the tray and pull it fully open.
(Sample Illustration) Drive tray fully extended
5 Hold the disc by its edges and check that it is free of
dust.
If the disc is dusty, clean it with a clean dry cloth.
6 Place the disc carefully in the disc tray, label side out.
(Sample Illustration) Positioning the disc in the drive
7 Gently press the disc onto the center spindle until it
clicks into place.
Handle DVDs and CDs carefully, making contact only
with the center hole and edge. Do not touch the surface
of the disc. Do not stack discs. If you incorrectly handle
the discs, you could lose data.
To Next Page
Loading...
