iv [CONFIDENTIAL] QOSMIO G30 Maintenance Manual (960-546)
The manual is divided into the following parts:
Chapter 1 Hardware Overview describes the QOSMIO G30 system unit and each
FRU.
Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve
FRU problems.
Chapter 3 Test and Diagnostics describes how to perform test and diagnostic
operations for maintenance service.
Chapter 4 Replacement Procedures describes the removal and replacement of the
FRUs.
Appendices The appendices describe the following:
Handling the LCD module
Board layout
Pin assignment
Keyboard Scan/Character Codes
Key layout
Wiring diagrams
BIOS Rewrite procedures
EC/KBC Rewrite procedures
Reliability
Maintenance of TOSHIBA RAID
To Next Page
Loading...
