Fig. 10-2-1
Secure the outdoor unit with fixing bolts and nuts if the unit is likely to be exposed to a strong wind.
Use ∅ 8 mm or ∅ 10 mm anchor bolts and nuts.
·
·
If it is necessary to drain the defrost water, attach drain nipple 7 to the bottom plate of the outdoor
·
unit before installing it.
10-2-1. Optional installation parts
10-2. Installation
<Fixing bolt arrangement of outdoor unit>
Drain outlet
Air inlet
Air outlet
280 mm
500 mm
53 mm
97 mm
Ø25 mm
Part
Code
A
B
C
Parts name
Refrigerant piping
Liquid side : ∅ 6.35 mm
Gas side : ∅ 9.52 mm
Pipe insulating material
(polyethylene foam, 6 mm thick)
Putty, PVC tapes
Q'ty
One
each
1
One
each
To Next Page
Loading...
