FILE NO. SVM-14017
– 55 –
Edit Weekly timer program
Page 21
, follow steps 1 - 3To edit the program after conflrming the weekly timer setting
on below.
1
Press
.
•
The day of the week and the program number of the current day will be displayed.
2
Press
to select the day of the week and press
to select program number to be confirmed.
•
Resetting the operation.
3
Press
to exit confirming mode.
Deactivating WEEKLY TIMER operation
Press while “WEEKLY” is displayed on the LCD.
•
The “WEEKLY” indicator will disappear from the LCD. However, the program will remain in the
remote control.
•
The TIMER lamp goes off.
•
again, LCD shows the next
To reactivate the WEEKLY TIMER operation again, press
program. The program, after reactivation, is related to the clock
time.
8
C
PURE
TEMP.
PRESET
To Next Page
Loading...
