FILE NO. SVM-14017
– 59 –
10.
COMFORT AIR FLOW
•
Wide air flow : Air flows around the room.
•
Spot air flow : Air flow is concentrated at one point.
11. TIMER OPERATION
Daily timer allows the user to set both the ON & OFF timers and will be
activated on a daily basis.
Setting Daily T imer
Setting the ON Timer Setting the OFF Timer
1
Press for enter ON timer setting
Press
for enter OFF timer setting
2
Press for select desired ON
timer.
Press for select desired OFF
timer.
3
Press for set timer. Press for set timer.
4
Press for cancel timer. Press for cancel timer.
1
Press for enter ON timer setting
4
Press for select desired OFF
timer.
2
Press for select desired
ON timer.
5
Press
3
Press
for enter OFF timer setting
6
Press again during the
( or ) blink.
• During the daily timer is activating, both arrows ( , ) are indicated.
Note:
· Keep the remote control in accessible transmission to the indoor unit
otherwise, the time lag of up to 15 minutes will occur.
· The setting will be saved for the next same operation
12.
PRESET OPERAT
Set your preferred operation for future use. The setting will be memorized by the
unit for future operation (except air flow direction).
1.
Select your preferred operation.
2. Press and ho
ld for 3 seconds to memorize the setting. The
P
mark
displays.
3.
Press : Operate the preset operation.
While operating (Auto, Cool, Heat, Dry and these modes with PURE), Select
•
Every time...
When pressed, the air flow direction changes.
Spot left
Cancel Air
Flow
Spot right Spot
center
Wide left
Wide
center
Wide right