Need help?Do you have a question about the Toshiba RAS-13 Series and is the answer not in the manual?
Prepare air filters before unit operation.
Load batteries into the remote control correctly.
Set the time on the remote control.
Reset the remote control to its default settings.
Control the direction of airflow using the remote.
Use ONE-TOUCH for customized automated operation.
Automatically select cooling, heating, or fan operation.
Manually select cooling, heating, or fan only modes.
For dehumidification, moderate cooling performance is controlled.
Activate plasma air purifier and air ionizer.
Automatically control settings for faster cooling or heating.
Automatically control settings to save energy.
Operate unit using RESET button when remote is lost.
Set ON, OFF, and daily timers for automated operation.
Save and recall custom operation settings.
Automatically restart the unit after a power failure.
Limit power consumption for energy saving.
Control airflow and auto-off for energy saving during sleep.
Maintain a minimum temperature of 8°C in heating mode.
Includes filter reset, cleaning unit, ionizer, and purifier.
Reduce indoor unit moisture to prevent odors.
Information on unit protection, preheating, and performance.
Common issues and check points for unit operation problems.
Set up remote control for multiple indoor units.
General| Type | Split System |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Weight (Indoor Unit) | 9 kg |
| Noise Level (Outdoor) | 50 dB |
To Next Page
