FILE NO. SVM-06006
ā 69 ā
10-1. Indoor Unit
No. Part name Procedures Remarks
1 <How to remove the Air inlet grille>
1) Stop the operation of the Air conditioner
and turn off its main power supply.
2) Open the Air inlet grille with both hands.
3) Unfasten 3 screws (about two to three
rounds) for fixing the Panel arms.
4) Move the Air inlet grille toward.
5) Remove the Grille stopper from the axis of
the Front panel. After that, remove the Air
inlet grille.
6) Remove the Panel arms from the Front panel.
<How to install the Air inlet grille>
1) Insert three Panel arms on the Air inlet
grille and fix each securely by screws.
2) Set the Air inlet grille arm to the axis of the
Front panel. (Refer to 8-4-3)
3) Insert the Grille stopper to the correct
position and fix it securely with screws.
4) Push the Air inlet grille to the correct position.
Air Inlet grille
10. PARTS REPLACEMENT
Air inlet grille
Panel arm
Grille stopper
Air inlet grille
Panel arm
To Next Page
Loading...
