– 5 –
FILE NO. SVM-02008
Note : 1
• Capacity is based on the following temperature conditions.
Note : 2
• Charge refrigerant according to the table below.
RAS-18UFHP-E / RAS-18UAH-E RAS-24UFHP-E / RAS-24UAH-E
RAS-18UFP-E / RAS-18UA-E RAS-24UFP-E / RAS-24UA-E
Refrigerant RAS-18UFPX / RAS-18UAX RAS-24UFPX / RAS-24UAX
RAS-18UFP-AR / RAS-18UA-AR RAS-24UFP-AR / RAS-24UA-AR
RAS-18UFPX-T2 / RAS-18UAX-T2 RAS-24UFPX-T / RAS-24UAX-T
*1 No need to charge
15m or less 15m or less
refrigerant
*2 Need to charge
Over 15m up to 20m (20g/m) Over 15m up to 25m (20g/m)
refrigerant
Temperature
Condition
JIS C9612-1994
Cooling Heating
Indoor unit inlet air temperature
(DB) 27°C 20°C
(WB) 19°C 12°C
Outdoor unit inlet air temperature
(DB) 35 °C 7 °C
(WB) 24 °C 6 °C
To Next Page
Loading...