No. Part name
Procedures
Remarks
Electric part
box assembly
4
1) Follow the procedure item 3 .
2) Remove screw holding the electric part cover.
3) Disconnect the connectors for the fan motor
and louver motor from P.C. board assembly.
4) Disconnect the cord motor of Louver VT (5P)
from the Louver VT (L/R) connector.
5
) Remove the earth screw and earth line from
evaporator.
6) Pull out
TC sensor from sensor holder of
the
evaporator.
7
)
Remove the 2 fixing screws that secures the
electric parts box assembly
, unit display
assembly and remove the electric parts
box
assembly
.
Earth screw
Earth line
Washer
TC sensor
Sensor holder
Electric part cover
Screw
Connectors
3
L 2
1
N
Fan motor connector
Louver motor connector
Earth line
TC sensor
TA sensor
Louver motor VT (L) connector
Louver motor VT (R) connector
(black)
(black)
Screw
Screw
Unit display
Electric parts box
To Next Page
Loading...
