Edit Weekly timer program
To edit the program after conf rming the weekly timer
setting, follow steps 1 - 3 below.
.
● The day of the week and the program number of the
current day will be displayed.
to select the day of the week and
to select program number to be
● Resetting the operation.
1. Press
2. Press
press
conf rmed.
3. Press
to exit conf rming mode.
Deactivating WEEKLY TIMER operation
Press
while “WEEKLY” is displayed on the LCD.
● The “WEEKLY” indicator will disappear from the
LCD. However, the program will remain in the remote
control.
● The TIMER lamp goes off.
● To reactivate the WEEKLY TIMER operation again,
press again, LCD shows the next program.
The program, after reactivation, is related to the clock time.
To Next Page
Loading...
