Toshiba RAS-M24U2DVG-E - Pipe Materials and Processing Procedures

– 13 –
Installation Manual
EN-25 EN-26
6 Duct design
 Arrangement
Referring to the following dimensions, manufacture duct at the local site.
A
A A
A
07,10,13 type 16 type
<Under air intake>
<Under air intake>
<Back air intake> <Back air intake>
A
A
<Under air intake>
<Back air intake>
22,24 type
A: Some models have no drain guard here.
ML.book Page 13 Wednesday, March 14, 2018 10:28 AM