–9–
4 Installation
Strictly comply with the following rules to prevent damage of the
indoor units and human injury.
• Do not put any heavy article on the indoor unit. (Even units are
packaged)
• Carry in the indoor unit as it is packaged if possible. If carrying in
the indoor unit unpacked by necessity, use buffering cloth or other
soft cloth to not damage the unit.
• To move the indoor unit, hold the hooking metals (4 positions) only.
Do not apply force to the other parts (refrigerant pipe, drain pan,
foamed parts, or resin parts).
• Carry the package by two or more persons, and do not bundle it
with plastic band at positions other than specified.
Model RAV- A B C
HM56 type 6.4 12.7 256
HM80 type 9.5 15.9 319
HM110 type 9.5 15.9 319
HM140 type 9.5 15.9 319
External view Unit: mm
187
61
57
64
Z
45°
840 Unit outer dimensions
Ceiling bottom surface
Ceiling bottom surface
840 Unit outer dimensions
780 Suspension bolt pitch
860 to 910 Ceiling opening size
950 Panel outer dimensions
Refrigerant pipe
connecting port (Liquid) A
Electrical control box
Refrigerant pipe
connecting port (Gas) B
Wiring intake
Ceiling bottom
surface
Drain pipe
connecting port
(Material: PP)
860 to 910 Ceiling opening size
Hanging bolt M10 or W3/8
(Locally procured)
690±20
Hanging bolt pitch
950 Panel outer dimensions
Ceiling panel (sold separately)
Ceiling bottom surface
416.5
241.5
408
172
112
44
189
72
263
269
323
132
30
C
Z-sectional
view
Knockout square hole for simple OA
for Dia.100
Ceiling bottom surface
28.5
17-EN 18-EN
To Next Page
Loading...
