Toshiba RAV-HM561UTP-E - Wired Remote Controller

16-EN15-EN
– 8 –
EN
3 Wired remote controller
Remote controller model name: RBC-ASCU1*
3.1 Component Names and Functions
When operating the button, the LCD backlight will be lightened for 15 seconds.
■
Button
1234
Operation lamp
Lights during operations.
Blinks when a check occurs or the
protective device activates.
1
ON/OFF button
Press the button to turn on the air conditioner, and press the button again to turn off the air conditioner.
2
Setting button
It is used for temperature setting in general conditions. In running mode, fan speed mode and wind direction
mode, it is used for the change of respective settings.
3
Timer off button
Set the timer off.
4
Menu button
It is used for the selection of the running mode, fan speed and wind direction.
Press of the button each time, then it will switch in the following order.
• In different modes of the indoor unit, the selection of fan speed or wind direction may be omitted.
1
Running mode indication icon
Indicate the selected running mode.
2
Central control indication icon
It will be displayed when the air conditioner
is centrally controlled and used by a central
remote controller and other central control
devices. If the central control prohibits using the
remote controller,
will fl ash when pressing
the ON/OFF, mode or temperature button on
the remote controller, indicating that these
buttons do not work. (The settings that can be
confi gured on the remote controller will vary
depending on the central control mode.
For details, please read the Owner’s Manual of
the central remote controller.)
3
Setting indication icon
Indicate that the system is checking
automatically after the circuit breaker has been
disconnected or other conditions have occurred.
4
Repair indication icon
Display when performing an inspection or the
protective device is running.
5
Test run indication icon
Display during the test run period.
6
Temperature setting indication icon
Display the selected setting temperature.
7
Wind direction indication icon
Display when the louver moves up and down.
8
Louver position indication icon
Indicate the louver position.
9
Louver locking indication icon
Display when there is a louver locking device.
(4-Way cassette type only)
Normal
Operation
Operation
mode
Fan speed
Wind
direction
■
Indication icon
All the icons shown on the display are for illustrative purposes only. Cooling only model do not show heating-related
icons. When “SETTING” fl ickers, the operation will not be accepted.
2
3
4
5
6
10
14
11
12
15
7
8
1
9
13