– 8 –
3 Remote controller
Remote controller model name: RBC-AMSU5
Operation section
Push each button to select a desired operation.
• The control saves commands in memory and after the initial setting, there is no need for any additional
settings unless changes are desired. The air conditioner can be operated by pushing the [ ON/OFF]
button.
1 [ MONITOR] button
Displays the monitoring screen.
2 [ MENU] button
Displays the menu screen.
3 [ CANCEL] button
Functions as indicated on the screen, such as
returning to the previous menu screen.
4 [ ∧ ] button
During normal operation: adjusts the temperature.
On the menu screen: selects a menu item.
5 [ ∨ ] button
During normal operation: adjusts the temperature.
On the menu screen: selects a menu item.
6 [ F1] button
Varies its function according to the setting screen.
7 [ F2] button
Varies its function according to the setting screen.
8 [ ON/OFF] button
1
2
3
7
8
4,5
6
24
Room A
12:00
Mode
Fan Speed
Cool
The button LED lights while the air
conditioner is running.
Display section
In the display illustration below all the icons are shown to explain each operation. When the unit is in operation,
only relevant icons will be displayed.
Switching between the normal display and detailed display
Push and hold the [ CANCEL] button and [ MONITOR] button at the same time for more than 4 seconds
to switch the display mode.
The normal display mode is selected as a factory default setting.
Normal display mode (factory default)
Detailed display mode
Energy saving icon
• Displayed when performing the power saving operation of
the air conditioner.
Soft cooling icon
• Shows the air conditioner is performing the soft cooling
operation.
Saving icon
• Displayed when performing operation by suppressing
excessive heating or excessive cooling through automatic
correction of the temperature set point.
(*1)
24
Room A
12:00
Mode
Fan Speed
Cool
Icons appear on the screen when the detailed display
mode is selected.
*1 • The “ Preparing to heat” icon appears when the
heating operation starts or when defrosting operation.
The indoor fan stops or the operation becomes the
blowing operation when it is displayed.
• It may be displayed depending on the model when
“ Preparing to operate” is displayed.
(*1)
15-EN 16-EN
To Next Page
Loading...
